CITY WATER REPORT
Is Pullman Tap Water Safe? 2026 Water Quality Report
PULLMAN WATER DEPARTMENT CITY OF serves Pullman · 31,315 residents.
- Utility
- PULLMAN WATER DEPARTMENT CITY OF
- Population served
- 31,315
- Water source
- Groundwater
- Disinfectant
- Pending utility report
- Hardness
- Pending utility report
Perfluorooctanoic acid (PFOA): not detected (limit 4.0 ng/L).
About this score
What the record shows
PULLMAN WATER DEPARTMENT CITY OF (EPA PWSID WA5369880) delivers groundwater to 31,315 residents. This report reflects 3 federally regulated PFAS result(s) from the 2024 UCMR5 round and the latest Lead & Copper Rule 90th-percentile result. Water hardness and disinfectant type are pending the utility's own annual report.
Your water system
resolution confirmed
- PULLMAN WATER DEPARTMENT CITY OF — serves most of the city
PULLMAN WATER DEPARTMENT CITY OF is the primary municipal supplier for most Pullman addresses. Confirm your supplier on your utility bill.
PULLMAN WATER DEPARTMENT CITY OF is the public system on record for this city. This identifies which utility serves the city — confirm yours on your water bill before acting on a specific finding.
What stands out in Pullman
Each row links to a dated measurement in the supplier profile. A missing measurement is never shown as a non-detect.
What this data doesn’t tell you
Public water-system monitoring reflects the system, not the water at an individual household tap at a given moment. Home plumbing, fixtures, storage, sampling location and timing can all change what actually reaches your glass.
The data behind this report
| Contaminant | Result | Benchmark | Sampled | Source |
|---|---|---|---|---|
| Perfluorooctanoic acid (PFOA) | < 4 ng/L | 4.0 ng/L federal MCL (2024) | 2024 | UCMR5 Analytical Results — PULLMAN WATER DEPARTMENT CITY OF (WA5369880) |
| Perfluorooctane sulfonic acid (PFOS) | < 4 ng/L | 4.0 ng/L federal MCL (2024) | 2024 | UCMR5 Analytical Results — PULLMAN WATER DEPARTMENT CITY OF (WA5369880) |
| Perfluorohexane sulfonic acid (PFHxS) | < 10 ng/L | 10.0 ng/L federal MCL (2024) | 2024 | UCMR5 Analytical Results — PULLMAN WATER DEPARTMENT CITY OF (WA5369880) |
| Lead (90th percentile) | 2.1 µg/L | 15 µg/L federal action level | 2021-2023 | Lead & Copper Rule 90th-percentile — PULLMAN WATER DEPARTMENT CITY OF (WA5369880) |
Perfluorooctanoic acid (PFOA)
- Result
- < 4 ng/L
- Benchmark
- 4.0 ng/L federal MCL (2024)
- Sampled
- 2024
Perfluorooctane sulfonic acid (PFOS)
- Result
- < 4 ng/L
- Benchmark
- 4.0 ng/L federal MCL (2024)
- Sampled
- 2024
Perfluorohexane sulfonic acid (PFHxS)
- Result
- < 10 ng/L
- Benchmark
- 10.0 ng/L federal MCL (2024)
- Sampled
- 2024
Lead (90th percentile)
- Result
- 2.1 µg/L
- Benchmark
- 15 µg/L federal action level
- Sampled
- 2021-2023
Every value is the published result from the cited public record. A reporting limit is the lowest level the method could reliably quantify — a non-detect is not a guarantee of zero.
What can you do about it?
To reduce exposure to what was reported in Pullman, these treatment technologies are relevant to the contaminants found here:
- Reverse osmosis
- NSF/ANSI 53 lead-certified filters
- Replacing lead service lines
Understand water treatment technologies — then the specific products below are matched to these findings.
Recommended solutions
NSF/ANSI 53 lead-reduction filter (optional)
leadOur pick: Clearly Filtered Water Filter Pitcher, 10 Cup BPA Free Water Filtration
Recommended because There is no safe level of lead, and older home plumbing can add it at the tap.
Recommendations are matched to the published findings first; the commercial offer is looked up afterwards and never changes which products qualify. As an Amazon Associate, PurityMap earns from qualifying purchases. Affiliate disclosure.
Frequently asked questions
Who provides tap water in Pullman?
PULLMAN WATER DEPARTMENT CITY OF (PWS ID WA5369880) is the public water system on record for Pullman, Washington. Confirm the utility on your water bill before acting on a specific finding.
Where does Pullman get its drinking water?
Groundwater (primary source of record in EPA SDWIS).
What does the latest Pullman water report show?
Across the tracked parameters, PurityMap's current record for Pullman shows 0 contaminants measured above their benchmark and 4 within benchmark. Each finding links to its dated public record; a parameter that was never monitored is shown as pending, not as a pass.
Is there lead in Pullman's tap water?
In Pullman, lead is detected but within its action level in the published record. Lead can still enter water from household plumbing after it leaves the system, so a system result cannot rule out an individual tap — a certified home test is the only way to know yours.
Are PFAS "forever chemicals" in Pullman's water?
PFAS compounds appear in Pullman's published record; the findings show each one's measured state and how it compares to its benchmark.
Sources
Methodology: how we analyze water.
Follow Pullman's water
Get an email when new results are published for Pullman.
Double opt-in — we email a confirmation link. Unsubscribe anytime. No spam.
- Systems published
- 1 of 1
- Latest sample on record
- 2024 (PFAS) / LCR (lead)
The record, not the water. These describe how completely the city is monitored — not a quality score.